news_banner

Spread Anchor System for Precast Concrete: Design, Components & Applications

November 20, 2026

The safe and efficient lifting of precast concrete elements depends on choosing the right lifting anchor system. Among the available solutions, the spread anchor system offers a practical design for transferring lifting forces into concrete while providing flexibility in load application and installation.

Featuring a unique spread-foot design, the system enhances pull-out capacity and allows 360-degree load application when adequate edge distances are maintained. It consists of different anchor configurations, a compatible lifting clutch, and a recess former, providing a complete solution for precast concrete lifting operations.

 

In this guide, we explore how the spread anchor system works, its main components, and the factors to consider when selecting a suitale configuration.


What Is a Spread Anchor System?

A spread anchor system is a mechanical lifting solution designed for embedding into precast concrete elements. It provides a dedicated lifting point that allows concrete components to be handled, transported, and positioned using suitable lifting equipment.

 

Its defining feature is the spread-foot design at the lower end of the anchor. Once embedded in concrete, the spread foot helps distribute the lifting forces over a larger area, improving resistance to pull-out forces.

 

Unlike lifting solutions that rely primarily on a straight embedded section, the spread-foot configuration provides additional mechanical anchorage within the concrete.

 

Another important characteristic is its ability to accommodate 360-degree load application, provided that the required edge distances and installation conditions are maintained. This offers greater flexibility when handling precast elements from different lifting directions.


How Does a Spread Anchor System Work?


The spread anchor system works by transferring lifting forces from the lifting equipment through the anchor and into the surrounding concrete.

 

During installation, the anchor is positioned inside the precast concrete formwork before the concrete is poured. A recess former is used to create the required access area around the lifting point.

After the concrete has hardened and reached the required strength, the recess former can be removed, exposing the anchor connection point. A compatible ring clutch is then attached to the anchor to establish the lifting connection.

 

When lifting begins, the force applied by the lifting equipment is transferred through the clutch and anchor into the surrounding concrete. The embedded spread foot provides mechanical resistance against pull-out forces.

 

For safe operation, the anchor configuration, concrete strength, edge distances, and lifting direction must all be considered during the design and installation process.


Spread Anchor Types and Configurations

Different precast concrete elements have different dimensions, reinforcement arrangements, and lifting requirements. To accommodate these variations, the EATHU Spread Anchor System includes six anchor configurations.

 

Each model has a distinct geometry, allowing manufacturers and precast concrete producers to select an appropriate design according to their project requirements.



TPA-FS Spread Anchor

The TPA-FS features a relatively compact body with a spread-foot design at its lower end. Its configuration provides an embedded anchorage point for transferring lifting forces into precast concrete.

TPA-FZ Spread Anchor

The TPA-FZ features a wider anchor body with two elongated openings. Its geometry distinguishes it from the other models in the product range and provides another configuration for precast concrete lifting applications.



TPA-FD Spread Anchor

The TPA-FD has a slim, elongated body with multiple connection openings. Its narrow profile offers an alternative configuration for projects where the available installation space is an important consideration.


TPA-FU Spread Anchor

The TPA-FU features an extended body with multiple openings and a spread-foot structure. Its design provides another option for manufacturers working with different precast element configurations.


TPA-FX Spread Anchor

The TPA-FX has a slender, elongated profile with connection openings along its body. It is part of the spread anchor range, offering additional flexibility when selecting an anchor configuration.


TPA-FA Spread Anchor

The TPA-FA combines a shaped upper section with a spread-foot design at the bottom. Its distinctive geometry completes the range of available anchor configurations.

 

When selecting between these models, it is important to consider the lifting requirements, concrete element dimensions, installation conditions, and applicable technical specifications rather than choosing based on appearance alone.


Main Accessories: Ring Clutch and Recess Former

In addition to the embedded anchors, the spread anchor system includes two important accessories: the ring clutch and recess former. Both contribute to the practical installation and operation of the lifting system.


Ring Clutch

The ring clutch is a lifting accessory designed to establish the connection between the embedded anchor and the lifting equipment.

 

It provides a dedicated engagement point for lifting precast concrete elements. During operation, the clutch transfers lifting forces from the lifting equipment to the anchor.

 

Using the correct clutch is essential for maintaining a secure lifting connection. Compatibility with the selected anchor model and the applicable lifting requirements should always be verified before use.


 Recess Former

The recess former is used during concrete production to create a shaped opening around the lifting anchor.

This recess provides access to the anchor after the concrete has hardened, allowing the lifting clutch to be attached during handling operations.


A properly positioned recess former also helps ensure that the anchor connection remains accessible without requiring unnecessary modifications to the finished concrete surface.



Important Factors When Selecting a Spread Anchor System

Selecting a suitable spread anchor system involves more than choosing an anchor model. Several technical factors should be evaluated to ensure that the lifting arrangement meets the requirements of the precast concrete element.



Lifting Load Requirements

The expected lifting load is one of the primary considerations. The anchor must be selected according to the calculated lifting forces, including relevant load factors and the actual lifting arrangement.


Concrete Strength

Concrete must achieve the specified strength before lifting operations begin. The strength of the surrounding concrete directly affects the anchorage performance and resistance to pull-out forces.



Edge Distance and Anchor Position

Adequate edge distances are particularly important for spread anchor systems. The anchor position should be carefully planned to maintain the required concrete cover and prevent excessive stress concentrations near the edges.


Lifting Direction

The spread anchor system allows 360-degree load application under suitable installation conditions. However, the permitted loading directions and applicable edge-distance requirements must be verified for the selected configuration.


Accessory Compatibility

The ring clutch must be compatible with the selected anchor. The recess former should also match the required installation arrangement to ensure proper access to the lifting point.


Conclusion

The spread anchor system provides a practical lifting solution for precast concrete applications. Its spread-foot design enhances pull-out capacity and supports 360-degree load application when adequate edge distances are maintained.

 

With six anchor configurations, together with a ring clutch and recess former, the system offers different options for precast concrete manufacturers working with various element designs and lifting requirements.

 

Choosing the appropriate configuration requires careful consideration of lifting loads, concrete strength, edge distances, installation conditions, and accessory compatibility.

At EATHU, we provide precast concrete lifting system components designed to support different OEM project requirements. Contact our team to discuss your anchor requirements and explore suitable solutions for your precast concrete applications.



0

info@eathumetals.com

86-153 1874 1363

0086 - 532 - 88256388